I was in need of a pair of replacement lenses for my Ganador mirrors, so I contracted an OE Manufacturer of Automotive mirrors to replicate them. After footing the bill and going through the design process with them, I realized this could be a valuable part to share with the community and not just keep to myself.

We all know how poor the visibility is from the Ganadors, being that they are aimed for RHD vehicles and the surface area of the mirrors are undersized. This was another issue I wanted to improve. These new mirror lenses are both CONVEX on the left and right side for the widest possible viewing angle. This should help add back in the much needed visibility. It won’t be perfect, but it will be as good as it gets for LHD adaptations.

* If your original glass is already Convex, then these will not yield an improvement as it will be the same. Verify if yours are convex or flat to be certain.

They are also Blue Tinted, which is the more expensive option. Whether or not you’re trying to add back in more angle with the convexity, these lenses will be a worthwhile replacement if your Ganadors did not originally come blue tinted.

Specifications:

  • Direct Copies that fit ALL Ganador Mirrors
  • CNC Precision Cut in the USA
  • Seamed Edges
  • Convex / Wide Angle
    • Increases Vision by 30-40%*
  • European Sourced Glass
    • Thicker than Original Glass
  • Blue Tinted

*In comparison to Flat glass.

This will also be a LIMITED run, so if you just want to stock up on a spare set, now is the time.

After going through the design phase, I received the first sample set of the lenses, which is what the production run will look like.

The lenses were traced off of the backing plates.

A look at the thickness and side profile.

It’s hard to show the amount of curvature in the convexity in pictures, but this should give an idea.

NOTE!

These lenses will fit ALL Ganador Mirrors for ALL Makes & Models. The actual mirror portion is identical for every application, it is the cast bases that are bespoke. This is why, although subtle, the driver side mirror on the FD3S RX-7 is physically tilted inwards more than the passenger side. Most likely a cost-savings measure, but this is how Ganador fits and aims the mirrors.

So again, it doesn’t matter if you have a set of RX-7 or Civic or Prius Ganadors, these replacement lenses will work. The original lenses are stuck on to the plastic backing plates with double sided tape and is easily removed. The tape can be peeled off with your fingers after. Given the curvature of the new lenses, I recommend using silicone to attach them to the backing plates, which will help fill up the gaps.

I am about to push through a small production run of these lenses in pairs with the manufacturer. I need to know how many people are interested to get an idea of the numbers.

If you want a set, I am accepting Prepayments now.

They will be $110 Shipped for a pair. Production time will be about 2 weeks. I will update this post accordingly.

To get in and buy, please send payment to:
paypal@grandmighty.com

23 thoughts on “Ganador Mirrors: Blue Tint, Convex, Replacement Lenses

    1. In the pictures they admittedly don’t, but that’s because of my kitchen lighting. I have another post with them installed on my car, which you can see during regular day time lighting.

      But trust me, they are very much blue. If you have a regular set of lenses and you juxtapose these with them, the blue is completely obvious.

  1. Sent you an email yesterday!

    Would like to get a set but need the shipping cost to an AP (Armed Forces Pacific) address. Same as a US address, just that I’m in Japan.

    1. Hey Chris, I didn’t see the email? Could you send it again directly to eric [at] grandmighty.com

      If it’s a US territory, it should still be $110 shipped.

      Thanks.

  2. Hi my names JT its August 22nd 2018 and I’m asking to see if you have any left? I would be willing to buy asap thanks !

Leave a Reply

Your email address will not be published. Required fields are marked *