Way back when the car was repainted, I decided to spare the retractable power antenna instead of taking the opportunity to shave it. This was always something that I second guessed myself on, but now I’m glad I chose to leave it alone.

A member named HalfSpec on the NoRotors forum has designed an adapter to replace the dated power antenna with a modern S2000 antenna. I’m surprised that it actually took this many years before someone devised an offering for the RX-7. Back in my Miata days, one of the first modifications I did was install a Shark Attack II antenna.

The heart of the adapter kit is this adapter machined out of 6061 aluminum to a quoted 0.005″ tolerance.

antenna_zpsmcmffuz2

Adapter and OEM Honda S2000 antenna:

s2000antenna

The installation was easy. It can reasonably be done in minutes, but my predictably OCD tendencies extended the duration considerably.

First step, unscrew the captive nut and base grommet of the power antenna.

powerantenna

After unbolting and removing the antenna assembly, I spent most of my time here thoroughly cleaning everything. In addition to the retracting mast, in the name of weight savings, I ended up going a step further and canabalised and gutted all of the internals including the motor, plastic gears, and inner cover. The assembly’s metal grounding bracket reaches up to the antenna’s mast support and bypasses the internals, so it does not appear that stripping everything will have an affect on the signal strength. Either way, I rarely use the radio so this is all mostly an exercise in form.

antennaassembly

The adapter can then be pushed into the mast support and it seats itself via an interference fit.

antennamast

Once reinstalled back onto the car, here is the clever finale…

antennagrommet

The S2000 antenna simply screws into the adapter, and voilà.

s2000mod

shortantenna

antennamod

2 thoughts on “S2000 Antenna

  1. I’ve been planning on doing this for the longest time now! Thank you for the directions and thanks to HalfSpec for the adapter! Excellent work and attention to the smallest details! Yours is by far the cleanest FD I’ve ever seen.

    1. Thank you sir, HalfSpec did a great job with this and very thoroughly documented the install in his guide. You can find his thread on this in the Parts for Sale section on NoRotors. I can’t believe it took this long for someone to make a kit like this for the FD!

Leave a Reply

Your email address will not be published. Required fields are marked *